1981-88 Buick Regal / Oldsmobile Cutlass Door Skins - Driver Side
We Now have new 1981-87 Buick Regal Grand National & 1981-88 Oldsmobile Cutlass 442 H/O Door Skins. They now Replace GM part # 20488303 LH & Right hand GM part # 20488302 RH
Our door skins are made off of early door skins runs from a 1981 Regal. The lines are Crisp & clean. We compared them to some later Door skin replacements we had from the late 80's. You could see how the stamp had worn out. The line at the bottom didn't quite have the sharp edge below the chip guard. The handles had a slight dimple from the stamp not cutting clean thru the door handle opening. The mirror holes were similar.
The new skins are slightly heavier due to .02 increase in steel. This is just under .75 lbs. per door skin.
If you had the chance to see these displayed at shows we used a original skin & ours to show much less flex & how much cleaner the lines were. Every one complemented us on increasing the thickness rigid clean stamp lines. There are others on the market but we know what years they fit. If you have to guess the year do you think they put enough product development & time into the part
The units are EDP PPG Galvanized steel with ISO 9001 Certified.
THIS IS A FREIGHT SHIPMENT. DO NOT SIGN FOR DAMAGED FREIGHT!!! OPEN YOUR SHIPMENT AND INSPECT FOR DAMAGE PRIOR TO SIGNING! Sheet metal goods are held to a different standard than other shipment types. We have very little recourse with the carrier for damages of sheet metal that is signed for. WE MUST INSIST THAT YOU INSPECT THE CONTENTS PRIOR TO SIGNING. If there is damage, refuse the shipment and we will get a replacement out right away. Once you (or your body shop) sign for the shipment, you are committing to receive the merchandise in its shipped condition; therefore you own it at that point. While there may be some minor unseen scuffs in the EDP or insignificant damage due to freight shipping as this can happen; no sheet metal goods will be returned for minor unseen shipping damages that will be remedied by the sand/paint process. They are packaged extremely well but due to the nature of freight shipments things do happen. Please note that our sheet metal products are EDP (Electrophoretic deposition)coated. This is not a paint finish. It is a protectant which inhibits rust. This coating must be sanded off prior to prime and paint. So a few scuffs on the EDP coating does not constitute a damaged item.
With OEM drying up & surpassing the $450 mark each this is a better reasonably priced alternative.
LH part # GBP 20488303
RH part # GBP 20488302
SET Part # GBP 2048830203
$195 FREIGHTShipping fee for business delivery WITH LOADING DOCK in the continental U.S. Shipping will be adjusted when processed. $200 additional Residential delivery surcharge will apply if COMMERCIAL address cannot be verified. Outside continental US, additional fees will apply.
