Are you tired of your looking at your old plastic sagging and insulation below the steering column? If so, this part is perfect for you and your G Body vehicle.
This metal bracket is designed to repair the plastic that is under your dash on the driver side. Over time this part sags and hangs down. You can see the Jute padding behind it. If you have performed a lot of work under your dash this will allow it to get even worse.
This metal bracket is designed to be attached to your plastic and re-enforce it from sagging. There is nothing worse when trying to access your fuse panel and this is sagging down. You just have to remove the plastic to switch out a fuse. With this bracket it will shave 30 years off the life of your plastic and keep like new.
what it fits: All G-body cars:
78-87 Buick Regal/Grand National/GNX, Chevrolet Monte Carlo, Chevrolet El Camino, Chevrolet Malibu, GMC Caballero, Oldsmobile Cutlass (Supreme/Calais/Cruiser/Salon), Pontiac Grand Prix, the Pontiac Grand LeMans, and the Pontiac Bonneville from 1982-1988.
Material: 11 Gauge (1/8" thick) Steel
Finish: Painted satin black similar to color under the dash plastic.
Number of Pieces: 1
Total Weight: About 1 Pound
Width: Center Section 2 1/8"
Width Near Ends: 2 3/4"
Length: 18 1/2"
Lip: 3/8"
Circular Hole Diameter: 1 1/2"
Two Ovals: Width is 1/2" and Length: 1"
Distance From Oval To Oval For Assembly Purposes: Just under 16 1/4"
Assembly Tools and Instructions: You will need a 7MM socket, ratchet and five minutes time. Use your existing washers and screws and install this support bracket.
