HRpartsNstuff Frame Braces

These are braces that were designed to reinforce the stock mounting brackets where the upper and lower control arms mount to the frame. These help reinforce and keep the brackets from bending or being ripped out under high HP applications. When a car is launched, the lower control arms are actually lifting the car by this bracket as the weight transfers. A few people have reported that they have experienced the lower control arms going through the floor boards when launching! These should only be needed on higher HP cars that drag race with slicks and/or launch hard. These are a weld in application between the frame and bracket, where the front of the lower control arm bolts in place. They are laser cut for a precise fit and for easy installation.

The frame and bracket may need cleaned off before welding them into place. Extra care should be taken around any fuel lines, wires, or other things that might be effected while welding. It could be welded in completely or just stitch welded, either method is acceptable. Detailed instructions and a picture showing the installation location will be included. Think of these as a very inexpensive insurance policy so that your car doesn't get torn up.

Lower only $45.00

Upper only

Set of upper and lower $69.95