We came out with a 1 piece pipe for the Buick hot air cars. Now the 1 piece 86-87's You could even go maf less or place your Mass air flow in a desired location if you want a Mass air flow sensor. The pipe is custom hand built right here in North Carolina. Each pipe is carefully jigged & built 10 at a time to ensure accuracy.
So what this pipe allows you to do is run one clean straight shot to your air cleaner out side below the air dam with true flowing 4". It has Less couplings then other kits. It is essentially a 1 piece 4" aluminum pipe. The kit comes with a 4" coupling from the TURBO to the pipe. It then evenly follows the Radiator support. The bends for where your mass air are set up for you to be able to splice in your Mass air flow where ever you would like to. Simply decide where you want it. Remove the section of pipe to fit the 4" mass air in place.
Then the pipe is stubbed thru the radiator support opening where your head light wiring is. There is a 90 that I would suggest attaching first. We put this thru the radiator support opening first & then to the turbo. Then we supply another 4" stub to go to the supplied 4" filter.
Notice with a 70 Turbo you do not need an IAC relocation kit. This will save you almost $100
So here is what you get:
1 - aluminum mandrel bent 1 piece pipe
3 - couplings & clamps
1 - 90 & clamps
1 - 10.25" long Cotton gauze re-usable filter that adapts from 3"-3.5"-4"
Options come in Black Red or Blue for your hoses & your filter.
We used car with removed front bumper for this picture to show installation. Send us yours so we can put them on our site.
Also available in 3" and 3 1/2"
|Hoses & Filter Options: